1.5g 2.4g 5.8g 100w Uav Module Jammer

Send Inquiry

Product Description

It is a 1.5g 2.4g 5.8g 100w Uav Module Jammer to 1560-1620MHz signals. This module has the advantages of high average output power, good in-band flatness, and small offset between upper and lower sidebands.Regular type with signal source，if you want without signal source type also can offer（input signal 0-10dBm）

Product Detail

1. 1.5g 2.4g 5.8g 100w Uav Module Jammer Introduction

It is a wireless information security module dedicated to 1560-1620MHz signals.

2.1.5g 2.4g 5.8g 100w Uav Module Jammer Specification

2.4GHz 100W RF Power Amplifier Specification
No.	Item	Data	Unit	Notes
1	Frequency	1560-1620	MHZ
2	Work Temperature	-20~+70	℃
3	Max Output Power	100	W
4	Input power	5	dBm	0-10dbm optional Regular type with VCO inside no need input
5	Work Voltage	24-28	V
6	Max Gain	50	dB
7	Max Current	10	A
8	Impedance	50Ω
9	Output Connector	N/F		Customized
10	Power Amplifier Efficiency	45		when Max Output
11	Switch Control	high low level current	V	24-28V Or Customized
12	Standing Wave Protection	OK
13	Temperature Protection	75°	℃
14	Size	20011024	mm
15	Weight	0.88	Kg

3.Precautions for use
Power supply needs to carry more than24V 10A
If the output power is greater than 5W and above, it is recommended to strengthen the heat dissipation treatment, such as adding a heat sink or adding a fan.
When connecting, you must first screw on the antenna, then connect the front-end source device, and finally supply power

Send Inquiry