5.8g 100 Watt Uav Signal Jammer Module

Send Inquiry

Product Description

Texin is 5.8g 100 Watt Uav Signal Jammer Module manufacturers and suppliers in China. It is a wireless information security module dedicated to 1560-1620MHz signals. This module has the features of high average output power, good in-band flatness, and small offset between upper and lower sidebands.

Product Detail

5.8g 100 Watt Uav Signal Jammer Module Features：

Ø Working frequency band: 5.7~5.9GHz

Ø Working voltage: 28-32V

Ø Maximum output power (P1dB): 100W (50dBm)

Ø Working current: 9000mA@Pout 50dBm 32V

Ø Average efficiency: 60%

Ø Working temperature: -20℃～60℃

Customized Frequency

DIP No.	PIN definition	Function	Remark
1	D6	Attenuate 16dB	High level attenuation Low level does not attenuate
2	D5	Attenuate 8dB
3	D4	Attenuate 4dB
4	D3	Attenuate 2dB
5	D2	Attenuate 1dB
6	D1	Attenuate 0.5dB
7	LE	Serial Latch Enable Input
8	P/S	Serial/Parallel Mode Selection	High level serial mode (software control)
8	P/S	Serial/Parallel Mode Selection	Low level parallel mode (manual control)

Physical Structure

Ø Shell size: 216*110*28mm

Ø VOltage：28-32V

Ø RF interface: the output end is N external thread and internal needle（N-female）

Ø Power supply port: red and black wire

Ø Shell: aluminum material

Ø Fixed holes: four fixed positions around the shell

Ø Net weight: 0.85KG

Precautions for use

Ø Power supply needs to have 28V /15A

Ø If the output power is greater than 5W and above, it is recommended to strengthen the heat dissipation treatment, such as adding a heat sink or adding a fan.

Ø When connecting, you must first screw on the antenna, then connect the front-end source device, and finally supply power

Send Inquiry