450-550/650-750MHZ 65 Panel Antenna
Product Description
Product Detail
This 450-550/650-750MHZ 65 Panel Antenna is suitable for mobile communication base stations, wireless intercom systems, etc. to provide stable signal coverage and enhancement.
Product specification
|
Electrical Specifications |
|
|
Panel Antenna Frequency Range |
450-550 MHZ 650-750 MHZ |
|
Gain(dBi) |
450-550 MHZ 10±1dBi 650-750 MHZ 12±1dBi |
|
VSWR |
≤1.5 |
|
Polarization |
450-550 MHZ V 650-750 MHZ V |
|
Horizontal Beamwidth(0º) |
65±8º |
|
Vertical Beamwidth(0º) |
35±5º |
|
Front-to-back ratio(dB) |
≥22 |
|
Electrical lower inclination(0º) |
0º |
|
Isolation(dB) |
≥26 |
|
Input Impedance（Ω） |
50Ω |
|
Maximum input power(W) |
300W |
|
Input connector type |
2*N-K |
|
Lightning Protection |
DC Ground |
|
Mechanical Specifications |
|
|
Dimensions-mm(Height/Width/Depth) |
900*280*80mm |
|
Packing size(mm) |
975*330*330mm |
|
Antenna weight(kg) |
13.5Kg |
|
Rated Wind Velocity（m/s) |
31m/s |
|
Operational Humidity(％) |
10- 95 |
|
Radome Color |
offwhite |
|
Radome material |
UPVC |
|
Operating temperature(ºC) |
-40～55 º |
|
Installation Method |
Pole mounting |
|
Mounting hardware(mm) |
￠40～￠80 |
|
Mechanical tilt(º) |
0-10º |
Installation steps:
1.Remove the antenna and accessories, prepare the tool (wrench);.
2.Install the panel antenna with clamping code screw and serrated clamping code accessory on 40~80mm holding rod, let the antenna and the holding rod be parallel, the upper clamping code is completely pressed, adjust the height of the antenna installation and then tighten the nut on the upper and lower clamping code screw;
3.Adjust the antenna installation downward angle, tighten the nut on the screw with ★ in the figure.
4.Connect the corresponding feed line to the cable connector of the antenna according to the polarization label at the connector of the antenna, and wrap the waterproof glue to complete the installation.
Attention:
1.The installation of the panel antenna must be uniformly installed by professional personnel;.
2. The height of the panel antenna can be based on the actual installation environment, no tall buildings or large metal bodies nearby, no obstruction, etc..