350-450/850-1050MHZ 65 Panel Antenna
Product Description
Product Detail
350-450/850-1050MHZ 65 Panel Antenna is used by police, fire departments, and other emergency services for reliable communication in the field. And ensures clear and stable signal transmission even in challenging environments.
Product specification:
|
Electrical Specifications |
|
|
Panel Antenna Frequency Range |
350-450 MHZ 850-1050 MHZ |
|
Gain(dBi) |
350-450 MHZ 10±1dBi 850-1050 MHZ 12±1dBi |
|
VSWR |
≤1.5 |
|
Polarization |
350-450 MHZ V 850-1050 MHZ V |
|
Horizontal Beamwidth(0º) |
65±8º |
|
Vertical Beamwidth(0º) |
35±5º |
|
Front-to-back ratio(dB) |
≥22 |
|
Electrical lower inclination(0º) |
0º |
|
Isolation(dB) |
≥26 |
|
Input Impedance（Ω） |
50Ω |
|
Maximum input power(W) |
300W |
|
Input connector type |
2*N-K |
|
Lightning Protection |
DC Ground |
|
Mechanical Specifications |
|
|
Dimensions-mm(Height/Width/Depth) |
900*280*80mm |
|
Packing size(mm) |
975*330*330mm |
|
Antenna weight(kg) |
13.5Kg |
|
Rated Wind Velocity（m/s) |
31m/s |
|
Operational Humidity(％) |
10- 95 |
|
Radome Color |
offwhite |
|
Radome material |
UPVC |
|
Operating temperature(ºC) |
-40～55 º |
|
Installation Method |
Pole mounting |
|
Mounting hardware(mm) |
￠40～￠80 |
|
Mechanical tilt(º) |
0-10º |
Antenna installation instructions:
1.Take out the panel antenna and accessories and prepare the tools (wrench);.
2.Install the antenna with clamping code screw and serrated clamping code accessory on 40~80mm holding rod, let the antenna and the holding rod be parallel, the upper clamping code is completely pressed, adjust the height of the antenna mounting and then tighten the nuts on the upper and lower clamping code screws;
3: Adjust the panel antenna installation downward tilt angle, tighten the nut on the screw with ★ in the figure.
4. Connect the corresponding feed line to the cable connector of the antenna according to the polarization label at the antenna connector, and wrap the waterproof glue to complete the installation.
Attention:
1.The installation of the panel antenna must be uniformly installed by professional personnel.
2.The height of the panel antenna can be based on the actual installation environment, no tall buildings or large metal bodies nearby, no obstruction, etc..